Concrete Remover is for removing cement contamination from a wide range of substrates. It is formulated to clean concrete mixers, pumps and GRC moulds, cement silos, associated plant and tools.
Ideal for regular cleaning of ready-mix concrete lorries and pumps, keeping them clean, without damaging paintwork.
Contains a naturally occurring, organic acid that breaks down the cement matrix surrounding the sand and aggregates in mortars, render, bricks and concrete.
Breaking down this binder makes for the easy cleaning of mortar, render and concrete deposits from affected surfaces.
Made of an organic molecule, derived from sustainable farmed produce. It has no components subject to Workplace Exposure Limits (WEL).
PROTECTiT's Concrete Remover has major benefits over other concrete and cement cleaners because it is significantly safer to use and does not attack the underlying surface.
90% biodegradable, final biodegradability is in line with ‘easily degradable’ under OECD 301 and European Regulation No.648/2004.
Always test apply on a small hidden portion of the substrate before applying
Shake the closed container for 30 seconds before opening for use. Pre-wet the area to be treated with water.
Use Concrete Remover directly from its container, do not dilute or mix with other products.
Spray evenly over the contaminated area, using a low pressure sprayer.
A heavy application should be made when cleaning off cement and concrete residuals that are old and thick.
Keep the surface soaked for 30-40 minutes. Do not allow the treated surface to dry out during the treatment stage.
After treatment, scrub treated area with a hard-bristle brush if necessary. Rinsing off thoroughly using a low pressure water jet or spray.
Approved Applicator product training in ‘technology and application’ is provided by ProtectiT SP Ltd.
We recommend reviewing the health and safety data sheets located in the download tab prior to purchase to ensure this product is suitable for your application / removal requirements.